VEGA CONTROLS VEGAVIB S 61 Level Switch

VEGAVIB S 61

Function: The vibrating rod of VEGAVIB is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. No special adjustments are required to set up VEGAVIB S 61.

Application: VEGAVIB S 61 is used as a level switch in free flowing powders, granulates and coarse grained solids and detects reliably and accurately when a point level is reached. The optimum rod design avoids jamming and buildup of bulk solid material. It is ideal as a high or low level switch in a vessel detecting foodstuffs, perishable or granulate materials which could be retained in a fork solids level probe.

Technical:

 

Process pressure                           -1 to16 bar

Process temperature                     -50 to +150 °C

Density                                               > 100 g/l

Material housing                              plastic PBT

Protection                                          IP 66/IP 67

Materials, wetted parts                   316L

Approval                                             option: ATEX II 1/3 D IP6X T

Electronics transistor                     (NPN/PNP)

Load current Transistor                 max. 400 mA

Turn-on voltage Transistor            max. 55 V DC

Supply voltage Transistor              10 to 55 V DC

Power consumption Transistor    max. 0,5 W

Electronics double relay                 (DPDT)

Supply voltage double relay           20 to 253 V AC, 50/60 Hz, 20 to 72 V DC

Power consumption double relay 1 to 8 VA (AC), ca. 1,3 W (DC)

Turn-on voltage double relay          min. 10 mV / max. 253 V AC/DC

Switching current double relay       min. 10 ?A / max. 3 A AC, 1 A DC

Breaking capacity double relay      max. 750 VA, 54 W